Description

Introducing a floating magnetic tumbler from the popular tower series, known for its ease of use and sophisticated design.
Tumblers are used many times a day for brushing your teeth, gargling, staying hydrated, and more. While keeping them near water is convenient, the bottom can get wet and slimy, and water droplets can accumulate inside, making them unsanitary.
This magnetic tumbler floats upside down, allowing for good ventilation and quick drying for hygiene! Since it doesn't come into contact with water, the bottom stays slimy, so it can always be stored cleanly.
By floating it, you can utilize wasted space and make daily cleaning easier.

Specifications

Size:  70x70x95mm ・Capacity: 200ml
Material: Tumbler: ABS resin (with magnet) Film Hook (Hook: ABS resin, steel (unichrome plated)); Film Surface & Core: Polycarbonate; Film Inner: PET; Film Adhesive & Cushion: Silicone

Care Instruction

■ Heat-resistant temperature: Tumbler: 90°C Film Hook: 60°C, Cold-resistant temperature: -40°C
■ Do not pour hot water (over 60°C) on the film hook or leave it submerged in hot or cold water. 
■ After installation, please check that the film hook is firmly attached before use.
■ The film hook will not stick if there is dirt or dust on the wall or the adhesive surface of the film. Make sure the adhesive surface is clean before installation.
■ Adhesive strength may vary slightly depending on the surface finish, material, condition, paint, strength, and environment of the installation surface.
■ When installing the tumbler on a wall, make sure the entire magnet is firmly attached to the wall and that the product is securely fixed in place.
■ Leaving the film hook attached in the same place for an extended period of time may cause mold, slime, or discoloration to form on the wall or the back of the film hook. Therefore, clean the installation surface and reattach the film hook every few month
■ The film hook may deteriorate or break with long-term use. Also, if you notice any abnormalities during use, discontinue use immediately.
■ Gently wash the surface of the film hook with water or lukewarm water to remove dirt, then dry thoroughly
■ Wash the adhesive surface of the film hook with water while gently rubbing it with the pad of your finger. Do not use detergents or other cleaning agents.