Description

This set includes a popular convenience store coffee cover, a special lid and a sleeve with a handle.
You can hang the sleeve with a handle on your arm to free up both hands, making it very convenient to carry.
The lid makes it easier to drink directly from the cup, and also improves the heat retention effect.
The stainless steel cup has a vacuum double structure that keeps drinks warm and cold, and can hold regular and large iced drinks. If you put in a regular size, the bottom will float a little, but the cooling effect will be almost the same. Depending on the type of cup, it can also accommodate large hot drinks. (※Varies depending on the cup of each convenience store.)
When drinking at the office, car, or home, you can keep your drink fresh for a long time, and it also prevents condensation so your desk won't get flooded.
The white marble pattern is elegant and luxurious.

Specifications

Size: W90×D86×H125mm Capacity: 420ml
Box: W110×D245×H90mm
Material: Body: Stainless steel, Lid: AS resin, Gasket: Silicone rubber, Sleeve: Synthetic leather

Care Instructions

■Microwave: Not allowed
■Oven: Not allowed
■Dishwasher: Not allowed
■Cooling effect: Below 11 degrees (At room temperature of 20 degrees ± 2 degrees, the product is filled with cold water and left for 6 hours after the temperature reaches 4 degrees ± 1 degree)
■Heat retention effect: Above 45 degrees (At room temperature of 20 degrees ± 2 degrees, the product is filled with hot water and left for 6 hours after the temperature reaches 95 degrees ± 1 degree)
■The double structure creates a vacuum between the inside and outside of the body, making it less likely for heat to be transferred when you hold the outside.
■There is a hole on the bottom of the tumbler due to the vacuum manufacturing process, and a sticker is attached for protection. *Even if it peels off, it will not affect the function.
■For more effective results, pour a small amount of hot water (cold water) into the main body before putting in the drink and preheat (keep cold) it for a few minutes.
■Before using for the first time, check that the main body is not cracked or damaged, and wash it thoroughly with a soft sponge with dishwashing detergent.
■Do not use for anything other than keeping drinks warm or cold.
■When using as a cover for a drink cup, it may not fit properly depending on the shape of the drink cup used.
■Please note that the effect of keeping warm and cold varies depending on the environment, such as the temperature at the time of use and the specifications of the drink cup.
■There is a risk that the drink cup will tilt and the contents will spill, so be sure to hold the cup with your hand when bringing it to your mouth.
■When putting drinks directly into the cup, do not put in soups, sports drinks, etc. that contain a lot of salt, milk drinks, fruit pulp, tea leaves, etc., as they may cause rust and spoilage.
■If you put something with a strong smell in it for a long time, the smell may remain on the main body.
■Do not put dry ice in it.
■Do not leave a drink in it for a long time.
■Do not leave a drink in it for a long time, as it may lead to spoilage or deterioration, and consume it on the same day.
■Do not heat in a microwave oven.
■Do not put in a freezer.
■The paint on the main body and the heat and cold retention properties will deteriorate over time with use.
■If the heat retention properties decrease, the main body will become hot and may cause burns, so please stop using it.
■When using a lid, the cross section of the gasket is U-shaped. Attach it so that the grooved surface faces outward (the side that touches the tumbler).
■Leave about 2 cm of drink from the edge of the tumbler, and be careful not to put too much in.
■When closing the lid, check that the gasket is installed correctly and slowly attach it to the tumbler.
■The lid may be difficult to open and close due to internal pressure, but if you attach the lid to the tumbler with the slider open and then close the slider, the internal pressure will be reduced.
■The lid is not completely sealed, so be careful not to spill it when carrying it, and do not use it as a portable item to put in a bag, etc.
■When using the sleeve If you leave it attached for a long time, the sleeve or the tumbler body may become discolored or discolored. Remove the sleeve from the tumbler when not in use, do not leave it wet, and store it in a place away from high temperatures and humidity.
■When carrying a drink, make sure the lid is properly closed.
■Do not pull or swing the sleeve too hard.
■Due to the characteristics of the material, the surface may peel off due to moisture or long-term use. If it deteriorates, please refrain from using it.
■Do not place it near a fire or stove. It may cause burns, deformation of the product, or discoloration.
■If the product is deformed or damaged, immediately discontinue use.
■Do not subject the product to strong impacts, such as dropping it from a high place.
■Be careful not to rub it with a hard object as this may cause peeling.
■Be careful not to spill drinks when carrying it.
■Use and store out of reach of infants and young children.
■Chemicals contained in hand cream, alcohol, etc. may cause the paint to peel off.
■Do not wash the sleeve with water. If it gets dirty, wipe it with a dry cloth and store it in a cool place.
■After using the tumbler and lid, use dishwashing detergent diluted with lukewarm water.
■If the dirt on the inside of the main unit is difficult to remove, use oxygen bleach for about 30 minutes.
■Do not use bleach on the outside of the main unit as it may cause the paint to peel off.
■Do not soak the product in water as this may cause the paint to peel off, deform, or rust. Do not use alcohol, chlorine bleach, thinner, benzine, metal scrubbers, polishing powder, cleansers, etc.
■Do not use dishwashers or dryers.
■Do not sterilize by boiling, as this may cause parts to deform and result in burns.
■After cleaning, wipe off any water promptly and dry thoroughly.
■Insufficient maintenance may result in dirt, discoloration, odor, and peeling of the paint.
■Due to the action of impurities such as iron contained in water, red rust spots and water stains may form during use. In this case, fill the main unit with lukewarm water containing about 10% vinegar, leave for about 30 minutes, and then wash thoroughly with a soft sponge.
■Country of origin: China

\ Trending Now /

Best-Sellers

Editor's Picks

Summer Cooling

Gift Ideas